Family-owned · Mantua, OH · Since 1997(330) 274-0260
Services
Service Areas
Resources
AboutGalleryContact

Choosing Stone and Brick

Is Manufactured Stone Worth It for Resale Value? What the Numbers Show

For homeowners in Northeast Ohio who are weighing manufactured stone against natural stone as an investment in curb appeal and resale value.

What a national remodeling report says about manufactured stone veneer and resale, what it leaves out, and how to weigh it against natural stone.

Gray manufactured stone veneer on a house wall beside a window with black shutters

Manufactured Stone vs Natural Stone for Resale at a Glance

Manufactured stone and natural stone differ in how much resale evidence exists for each, and the table below sets that evidence beside the other points a buyer weighs. The full natural stone vs manufactured stone comparison covers weight, upkeep and fit in more depth.

What a Buyer WeighsManufactured Stone VeneerNatural Stone
Resale evidenceRecouped 208% of job cost nationally, third among 28 projects, in the 2025 Cost vs. Value Report (Cost vs. Value 2025)No natural stone veneer project appears among that report's 28 national-average projects
Weight and supportAt or under 15 lb per sq ft saturated for one product line, per a federal Materials Release (HUD Materials Release 910h)Varies by stone and cut thickness
Installation detail that protects the valueTwo layers of water-resistive barrier, metal lath and a nominal 1/2 in. scratch coat over sheathed wood frame for one product line, per HUD Materials Release 910hFollows the stone supplier's and the mason's method
Cost basis at Kelly Supply Co.$6.00-$10.00 per square footQuote required
Returns at the yardReturns are accepted only for unused standard stock items in their original, resalable packaging. Manufactured stone, natural stone slabs, thin brick and concrete block cannot be returned or exchanged.Same rule as at left: no returns or exchanges on natural stone slabs
When it suitsOwners adding an accent for curb appeal, where the report's modeled project is the closest national benchmarkOwners who value real quarried stone for its own sake and will rely on a local appraisal rather than a national figure

What the Cost vs. Value Report Measures

The Cost vs. Value report measures a set project, and the 2025 edition models replacing a 300 sq ft band of siding on the bottom third of a street-facing facade with manufactured stone veneer (CMHA 2025 summary). The same summary describes the return as perceived value, so it reflects what the market expects and not a measured sale price.

Among the 28 national-average projects, manufactured stone veneer recouped 208% of job cost, behind garage door replacement at 268% and steel entry door replacement at 216% (Cost vs. Value 2025). Fiber-cement siding replacement recouped 114% and vinyl siding replacement 97% in the same report, so the stone project ranked well above other cladding work.

What the Report Leaves Out

The report leaves out several things a seller needs to know. It lists no natural stone veneer project, so it cannot say whether natural stone returns more or less, and a national average cannot say what buyers in your neighborhood will pay.

Workmanship and condition also move the return. A veneer installed with poor detailing can cost value instead of adding it, so choose a mason who follows the manufacturer's instructions and local code. A local agent or appraiser is the better guide for a specific house.

Cost Basis for Each Stone

Cost basis at Kelly Supply Co. is $6.00-$10.00 per square foot for manufactured stone and quote required for natural stone, so a quote request with the wall size and the profiles you like is the way to compare them. Quotes cover the material, and the installer you hire quotes the labor separately.

Protecting the Return With Good Detailing

Protecting the return starts with the wall behind the stone. A HUD Materials Release for one manufactured stone line describes installation over sheathed wood frame with studs at 16 in. on center, two layers of water-resistive barrier, metal lath and a nominal 1/2 in. scratch coat (HUD Materials Release 910h). Show that sequence to your mason, and confirm the product's own instructions.

Which Stone Suits Which Goal

Which stone suits your goal depends on whether you are investing for resale, for the look of the house or for both, and the situations below show how the choice usually falls.

  • If resale evidence matters most, manufactured stone veneer has a national benchmark that natural stone lacks.
  • If you want real quarried texture and accept that no matching national figure exists, natural stone is the type to price.
  • When the budget is tight and the wall is an accent, quote both types with the same wall size and compare.
  • For a house you plan to sell soon, ask a local agent which exterior finishes buyers in your area respond to before you choose.

Frequently Asked Questions

Does manufactured stone add resale value?

The 2025 Cost vs. Value report lists manufactured stone veneer at 208% of job cost recouped nationally (Cost vs. Value 2025). Results vary by house and market, so read it as a national average.

Does the Cost vs. Value figure apply to natural stone?

The report lists no natural stone veneer project, so the figure does not speak to natural stone. A local agent or appraiser can say how natural stone reads in your market.

What can lower the return on a stone veneer project?

Poor installation detailing can lower it, which is why the manufacturer's instructions and local code should guide the mason you hire. Quote the material through Kelly Supply Co. and quote the labor with your installer.

Choose, Match and Order from One Yard

Call NowRequest a Quote