Choosing Pavers for a Driveway Starts With Thickness
Choosing pavers for a driveway starts with thickness, because a driveway carries vehicles. For pedestrian areas and residential driveways, 2 3/8 in. thick pavers are recommended, and pavements subject to vehicular traffic typically require 3 1/8 in. thick pavers, per the Concrete Masonry & Hardscapes Association (PAV-TEC-010). A driveway that takes delivery trucks or heavy vehicles may call for the thicker unit, so ask your installer which applies.
Hardscapes at the Mantua yard include pavers, and the thickness of each product is the first number to check on a sample or a product sheet.
Aspect Ratio and the ASTM C936 Definition
Aspect ratio compares a paver's length with its thickness, and units at 4:1 or greater should not be used in vehicular applications, while units at 3:1 or less are suitable for all vehicular applications (PAV-TEC-010). Check the length and thickness of any paver you are considering, then divide.
A concrete paver under ASTM C936 is a unit with a surface area no greater than 101 sq in., an aspect ratio that does not exceed 4 and a minimum thickness of 2 3/8 in., per the same guide (PAV-TEC-010).
Base and Bedding Sand for a Driveway
The base under a driveway carries the load, and aggregate base thickness for driveways is 6 to 8 in., per the same guide (PAV-TEC-010). The bedding sand on top should be screeded to 1 to 1 1/2 in. uncompacted and of consistent thickness.
An installer sources the aggregate and the sand and builds the base to the paver manufacturer's instructions. Kelly Supply Co. sells pavers and does not install them, so share these figures with the contractor you hire.
Slope, Edges and Drainage for a Driveway
Slope and drainage decide how a driveway behaves after a Northeast Ohio winter. The crossfall of the pavement should be at least 2% from the center, and vehicular pavements on slopes over 8% may require concrete header beams, per the Concrete Masonry & Hardscapes Association (PAV-TEC-010).
Freezing and thawing move wet ground, so ask the installer how the base will drain and how the edges will be held before you order the pavers.
Paver Brands Carried at the Mantua Yard
Paver brands carried at the Mantua yard include Aura and Belgard, and the brands page lists them by category. Belgard's own site lists driveways among its paver categories (Belgard), and which Belgard or Aura products suit a driveway depends on their thickness and shape.
Hardscapes at Kelly Supply Co. run $4.55-$12.90 per square foot, and the exact figure depends on the product you choose. Sample boards can be taken home from the Mantua yard, and the sample boards guide explains how to judge them.
