Retaining Wall Block at the Mantua Yard
Retaining wall block is one part of the hardscapes range at Kelly Supply Co., a family-owned masonry and stone yard in Mantua. Kelly Supply Co. sells wall block for pickup at the yard or for delivery to the job site, and how delivery works is explained on its own page. The yard sells block and does not build or install walls.
Hardscape pricing at Kelly Supply Co. runs $4.55-$12.90 per square foot, a range that covers pavers and wall block. The exact figure for a wall depends on the block, so a quote is the way to get a number for your project.
Wall block comes from brands Kelly Supply Co. carries, including Aura and Belgard. Belgard is the carried brand known for wall block, and the yard can show where each system differs when you stand in front of the product.

Choosing a Retaining Wall Block System
A retaining wall block system is chosen for how the units stack, how they set back from one course to the next, and how a cap finishes the top. Many segmental systems stack dry and interlock through a lip, pins or a built-in setback rather than through mortar, depending on the manufacturer's design, so the system you pick decides how each course sits on the one below.
Choosing is easier with the units side by side. Bring a sketch of the slope and the wall length, and the yard counter can walk you through the block options and the cap units that go with them.
- Block face and color, to match the house, patio or paver surface nearby.
- Unit depth and weight, which affect how many pallets the wall needs and how the pallets are placed on site.
- Cap units, which finish the top course and hold it level.
- The manufacturer's spec sheet for the block you choose.
Wall Block Specs From the Manufacturer
Wall block specs, such as compressive strength and the standards a unit is made to, come from the manufacturer's spec sheet for each system, and Kelly Supply Co. does not publish figures it has not confirmed. Call the yard for the sealers and adhesives in stock and the ratings of the wall block lines.
Products carry the manufacturer's own warranty; Kelly Supply Co. issues no warranty of its own.

Parts of a Retaining Wall Order
A retaining wall order can include more than block, because a wall holding back soil can also need base preparation, drainage and reinforcement, plus hardscape accessories such as edge restraints. The wall's height, the soil behind it and the water that reaches it decide how much of that applies to a given project. The crew building the wall will compact the base, toe in the first course, batter each course back and backfill behind the block.
In wall design, drainage means giving water behind the wall a path out, so a wall can use drainage stone behind the block and a drain pipe that carries water away. Taller or heavily loaded walls can also use geogrid, a reinforcing mesh laid between courses and tied back into the soil, and the wall's designer decides when it is needed.
Edge restraints and other hardscape accessories belong on the same order as the block when a project uses them, so the pallets arrive together. The page on hardscape accessories lists the related products.
Delivery to a Backyard Project
Delivery works from the Mantua yard to the job site across Northeast Ohio, with boom trucks and a Moffett forklift that place palletized block where the crew needs it. Delivery is quoted by distance and load, and the equipment is described under how delivery works.
Backyard wall sites are often sloped, so the pallet placement should be settled before the truck leaves the yard. Kelly Supply delivers basically anywhere a truck can reach safely.

