Face Brick at the Mantua Yard
Face brick is the brick that shows on the outside of a wall, and Kelly Supply Co. sells it from the Mantua yard for pickup or for delivery to the job site. The yard's customers split 80% residential and 20% commercial, and anyone can buy without an account.
Face brick belongs to the wider brick range at the yard. The brick makers Kelly Supply stocks are Belden Brick, Continental Brick, Summit Brick, Lee Brick, Statesville Brick and Marion Ceramics.

ASTM C216 Standards for Face Brick
ASTM C216 is the standard specification for facing brick, which it defines as solid masonry units made from clay or shale, per ASTM International. The standard sorts face brick by grade and by type:
- Grade SW is written for high resistance to freezing damage when the brick is saturated.
- Grade MW is written for moderate resistance to freezing damage.
- Type FBS covers general masonry use.
- Type FBX covers general use with tighter size variation than FBS.
Choosing a Grade for Ohio Weather
For an exterior wall that stays wet through freeze-thaw cycles, Grade SW may be the safer match to spec (write into the order). Which stocked lines list ASTM C216 is a question for the manufacturer's product data, so ask at the yard and read the data sheet before ordering.
Face Brick Sizes
Standard modular face brick measures 3-5/8 by 2-1/4 by 7-5/8 inches with a 3/8-inch joint, per Brick Industry Association Technical Notes 10. Brick names vary by manufacturer, so the same note recommends ordering by specified dimensions rather than by a size name.
For a repair, measure one brick on the wall and bring the numbers to the yard. A brick that differs from the modular figures points to a different product line, and a size-match (comparing length, height and depth) narrows the choices before color is considered.

Face Brick Colors and Textures
Face brick colors and textures change from one line to the next, and a sample under daylight tells more than a photo. The yard can color-match and texture-match a loose brick against stocked face brick; the brick matching page covers that service.
Masons can blend brick from several pallets while laying, so shade variation spreads across a wall rather than clustering in one patch. A mason may also cull (set aside) any piece that is chipped or far off in shade before it goes on the wall.
How Face Brick Is Made
Face brick starts as clay or shale and is fired in a kiln, which is the production route named in the ASTM C216 title. Firing can influence color and hardness, so two lines with similar names may not look alike on the wall.
Pickup and Delivery for Face Brick Pallets
Brick is palletized (stacked and strapped on a pallet), and a pallet order can be picked up at the Mantua yard as a will-call order (held for pickup) or delivered to the job site. Delivery uses boom trucks and a Moffett forklift from the Mantua yard to 21 Northeast Ohio cities, and how our delivery works explains the equipment.
Face brick pricing is Quote required. The brick price range applies to full brick only, and face brick has its own price, which is Quote required.
For contractors, trade pricing is not necessarily different from retail; typically the bigger the job, the better the price. The trade pallet pricing for brick contractors page covers the contractor side.

