Hand tools in Mantua, OH
Masonry & Concrete Hand Tools Supplier in Northeast Ohio
For masons, concrete crews and homeowners in Northeast Ohio picking up trowels, jointers and finishing tools for a wall, a slab or a repointing job and who want to add them to a materials order.
Kelly Supply Co. sells masonry and concrete hand tools from its Mantua yard, priced per item by request, alongside the brick, block and stone they are used with.
Call (330) 274-0260 during yard hours (Mon-Fri 7:00am-4:00pm) to reach the Mantua yard counter.

“Great people with quality building products and tools. Everyone that works here are professional and knowledgeable or skilled at what they do from the Salesmen, Yard Loader, and Delivery Drivers. I recommend Kelly Supply to anyone doing any kind of stonework in the area.”
Named Brand-by-Category Tool Matrix
Masonry and concrete tools at Kelly Supply Co. are sold per item, call for pricing, and the yard sells trowels, jointers, mixers and levels from the same Mantua counter as the brick, block and stone. Tool brands change with inventory, so ask which brand is on hand for the job. The yard carries Kraft Tool and Bon Tool.
The matrix below pairs each job with the tool that does it and the detail that decides whether a tool suits the work, using guidance from the Brick Industry Association and the American Cement Association rather than a flat brand list.
| Job | Tool | What to check |
|---|---|---|
| Placing mortar and cutting off excess | Trowel | Head joints should be filled completely, not slushed in |
| Tooling exterior joints | Jointer | Concave, V or grapevine profile, slightly larger than the joint |
| Mixing mortar | Mechanical mixer and a bucket | A bucket of known volume measures sand more consistently than a shovel |
| Setting thin brick | Notched trowel, rubber mallet, grout bag | Matches the method: thin set or thick set |
| Repointing | Toothing chisel, pointer's grinder | Cut depth should match the joint width |
| Floating and finishing a slab | Bull float, hand float, steel trowel, broom | The finish decides the tool: trowel for smooth, broom for grip |
Concrete Finishing Tools
Concrete finishing tools follow the order of the finishing steps, and the American Cement Association lists the sequence on its working-with-concrete page. A straightedge screeds the excess concrete off in a sawing motion to bring the slab to grade, and a long-handled bull float then removes high and low spots.
A hand groover grooves contraction joints to control random cracking, or the slab can be saw cut once it is hard enough to prevent raveling, according to the same association. A wood or metal hand float then embeds aggregate just beneath the surface.
A steel trowel gives a smooth, hard, dense surface, and a slab should always be troweled after floating rather than after bull floating alone. A broom drawn across concrete that is not yet thoroughly hard gives a slip-resistant surface, as long as the concrete holds the scoring impression.
Buying or renting an infrequently used finishing tool is a fair question for a one-time slab. Kelly Supply only sells tools; it does not rent them.


Masonry Hand Tools & Trowels
Masonry hand tools and trowels do three jobs in a brick wall: place mortar, shape the joint and clean up. A uniform bed of mortar is spread over only a few brick at a time, the brick is laid within about 1 minute, and mortar squeezed out of the bed joint is cut off with the trowel before tooling, as published by the Brick Industry Association in Technical Note 7B.
A jointer slightly larger than the joint is used to strike the mortar once it is thumbprint hard, and concave, V and grapevine profiles resist water penetration better than other profiles on exterior brickwork, according to the same note. Raked and extruded joints are not recommended outdoors because they leave ledges where water can pond. A level checks that the wall stays plumb as the courses go up.
Mortar should be mixed for at least 3 minutes and no more than 5 minutes in a mechanical batch mixer, according to the same note, and sand should be measured with a bucket or box of known volume rather than a shovel. Colored mortar reacts to retempering with color variation, so it should be batched in amounts the crew can use.
For repointing, deteriorated mortar should be cut out with a toothing chisel or a pointer's grinder to a depth of at least twice the joint width, generally 3/4 inch, and the head joints finished with a chisel, as published by the association in Technical Note 46. New mortar goes in layers no more than 1/4 inch thick, each tooled when thumbprint hard.
Repointing mortar should be no stronger than the original, because a stronger mortar can spall the brick face, and Type N is generally recommended for modern work, according to the same note. Matching new brick for a repair is covered under brick matching. Trade pricing is not necessarily different from retail; typically the bigger the job, the better the price. A contractor sets up a trade account by filling out a credit application: ask for it at the counter.
Why Buy Tools From Kelly Supply Co.
Kelly Supply Co. is a family-owned Northeast Ohio supply yard that has sold masonry and stone from Mantua since 1997, so a tool order can ride along with a pallet of brick or block. A common myth says tools are a separate trip from materials; at one yard the two can be picked up or delivered together, and anyone can buy with no account.

Frequently Asked Questions
Which tool brands do you carry?
Tool brands at the yard change with inventory, so call the counter for the current list. The yard carries Kraft Tool and Bon Tool.
Do you rent tools or only sell them?
Kelly Supply Co. sells masonry and concrete tools per item. Kelly Supply only sells tools; it does not rent them.
What jointer do I need for exterior brickwork?
A concave, V or grapevine jointer slightly larger than the joint suits exterior brickwork, because those profiles resist water penetration better than other profiles, according to the Brick Industry Association.
How deep should I cut out mortar for repointing?
Cut out old mortar to at least twice the joint width, generally 3/4 inch, according to the Brick Industry Association's Technical Note 46.
Can I buy tools and materials in the same visit?
Tools and materials are sold from the same Mantua yard, so one visit or one delivery quote can cover both.
Choose, Match and Order from One Yard
Send the request form and the Mantua yard team follows up quickly during yard hours (Mon-Fri 7:00am-4:00pm).
