Take-Home Sample Boards From the Mantua Yard
Take-home sample boards let a customer carry a piece of the future project home, and the Mantua yard is where the boards are kept. This is an in-person model, so you visit the yard, look over the boards in person and ask which sample you can take home.
Sample boards cover natural stone and manufactured stone, and the product pages for natural stone sample boards and manufactured stone sample boards show what each type involves. Sample boards are free to borrow: take one home and bring it back when you are done.
How to Get a Sample Board
How to get a sample board starts with a visit to the Mantua yard during yard hours. Look at the boards for the stone or brick you are considering, select the two or three that fit the house, and ask the counter which ones can come home with you.
- Visit the yard and view the boards in person.
- Select two or three finalists that suit the house, the roof and the trim.
- Ask which boards can be taken home and what the yard needs from you in return.
- Take the boards home and judge them where the material will go.
What Is Included With Your Sample
What is included with your sample depends on the product, and the yard can say which manufacturer information goes with each one. Manufacturers publish technical data on their products, so ask for the sheet that matches the stone or brick you are leaning toward and keep it with the board.
Are Sample Boards Free?
Sample board terms, including whether a board is free or paid, are confirmed at the yard, and none are stated on this page. Ask when you visit, and verify the check-out and return terms for each board before you leave.
How to Choose Using Your Sample Board
Choosing with a sample board works well when you test it in the conditions it will live in. View the board outdoors in morning, midday and evening light, stand back from it, and pair it with the trim and roof color on the house.
Why One Small Sample Can Mislead
A small sample may not show the full range of a product, because the Brick Industry Association notes that small samples used for preliminary selection may not represent the full range of colors and textures in a production run (Technical Notes 9B). For a large wall, that association describes a field panel of about 100 modular brick, roughly 15 sq ft, as the way to confirm the final selection (Technical Notes 9B).
Compare the Board With the Wall Course
For brick, compare the board with the wall course, since course height depends on the unit: three courses of modular brick stack to 8 in., five courses of engineer modular brick stack to 16 in., and one course of closure modular brick is 4 in. (BIA Technical Note 10). A modular brick is specified as 3 5/8 in. by 2 1/4 in. by 7 5/8 in., per the Brick Industry Association (BIA Technical Note 10), so a sample brick of that size shows how the joints and units will read across a full wall.
Keep the Boards Until the Order Is Placed
Keep each board until the order is placed, because the Brick Industry Association recommends keeping mock-ups and sample panels until the end of the project (BIA Technical Note 6). Evaluate the boards again on a different day before you commit.
Sample Boards for Brick Matching
Sample boards also help when new brick must match old brick, and bringing a brick or photos to the Mantua yard is a safe way to start. Brick matching is the page for that service. A close-up photo of the brick and a second photo from about twenty feet back help, and Kelly Supply can also send a salesperson to the site to look.




